APS Series
Product Description
APS series products are water based die casting mould release agents containing wax and synthetic additives.
Application/Usage
APS series products can be used in the die casting operation of aluminum. It is diluted with water and applied by spraying. Dilution ratio should be between 1/50 and 1/200, depending on the material type and die complexity.
| Product |
|---|
| APS Series |
| APS 15 S |
| APS 20 S |
BELGIN is continuously improving the product performance with its industrial experts and R&D studies. All given figures on product properties are of a general nature only and may vary depending on process. For more info about our product portfolio and optimum solutions to your process, you may send email to این آدرس ایمیل توسط spambots حفاظت می شود. برای دیدن شما نیاز به جاوا اسکریپت دارید or contact with BELGİN Technical Business Development and Support department on 0090 262 751 0292.
