PEARLFLUID MB SERIES
Product Description
It is a special mould release agent which is formulated using the highest quality base oils and specially selected additives. It is used primarily in the construction industry.
It forms a thin and homogenous release layer between setting material and its mould.
Application/Usage
it is used to release the material from the metal moulds in the concrete and casting industry, to prevent adhesion between the mould and the material and to prevent damage the mould purely.
It must be applied to form a thin film on the mould surface for easy and multiple releases. Do not apply excessive amounts of release oil so that it is running down the mould, as this could be detrimental and cause damage to the edge detail.
| Product | APPEARANCE | KINEMATIC VISCOSITY (40 °C, cSt) | DENSITY (g/cm3 @ 20 °C) | FLASH POINT (°C) |
|---|---|---|---|---|
| PearlFluid MB Series | ||||
| PEARLFLUID MB-25 | Yellow, Clear | 4,1 | 0,834 | 120 |
| PEARLFLUID MB-35 | Yellow, Clear | 8,5 | 0,85 | 185 |
BELGIN is continuously improving the product performance with its industrial experts and R&D studies. All given figures on product properties are of a general nature only and may vary depending on process. For more info about our product portfolio and optimum solutions to your process, you may send email to این آدرس ایمیل توسط spambots حفاظت می شود. برای دیدن شما نیاز به جاوا اسکریپت دارید or contact with BELGİN Technical Business Development and Support department on 0090 262 751 0292.
