Cuttex KM Series
Product Description
They are high performance cutting oils, which are formulated with highly refined base oils, EP additives and high performance additives. They are used for cutting and machining operations of metals. Their oil mist is minimized in virtue of their special additives.
Application/Usage
They are especially used for tapping, deep hole drilling, screw-cutting and copying of iron and iron alloys.
Their basic function is to prevent direct contact of two objects by creating an intermediate lubricant layer. They prevent metal deformation by absorbing the released heat because of the friction between work piece and cutting tool.
They are not recommended to be used for processing of copper and brass materials.
Product | APPEARANCE | KINEMATIC VISCOSITY (40 °C, cSt) | DENSITY (g/cm3 @ 20 °C) | FLASH POINT (°C) |
---|---|---|---|---|
Cuttex KM Series | ||||
CUTTEX KM 16 | Light Yellow, Clear | 16 | 0,856 | 180 |
CUTTEX KM 22 | Yellow, Clear | 22 | 0,865 | 190 |
CUTTEX KM 32 | Yellow, Clear | 32 | 0,875 | 200 |
CUTTEX KM 37 | Yellow, Clear | 37 | 0,878 | 210 |
CUTTEX KM 46 | Yellow, Clear | 46 | 0,801 | 220 |
CUTTEX KM 100 | Yellow, Clear | 100 | 0,81 | 230 |
BELGIN is continuously improving the product performance with its industrial experts and R&D studies. All given figures on product properties are of a general nature only and may vary depending on process. For more info about our product portfolio and optimum solutions to your process, you may send email to این آدرس ایمیل توسط spambots حفاظت می شود. برای دیدن شما نیاز به جاوا اسکریپت دارید or contact with BELGİN Technical Business Development and Support department on 0090 262 751 0292.