PRODUCT GROUPS
Product Description
QUENCHOIL MRT SERIES are the marquench oils which are produced by blending refined mineral base oils and special additives. They were formulated solvent-refined mineral base oils. They have high resistant to oxidation, low tendency to combustion and formation of carbonaceous deposits.
They are specially developed for hardening operations through its hardness formation yield, distortion control property and long service life.
Application/Usage
QUENCHOIL MRT SERIES provide to obtain homogeneous distribution of hardness thanks to their short vapor phase and special cooling characteristics. Also they minimize the risk of distortion.
They are used successfully in hardening operation of workpieces made by cementation and breed steel. They can be used in different type stoves a wide temperature range. They are suitable for hardening of thick-walled parts.
They can be used successfully in heat treatment of all type gears and shaft in automobile industry, rolling rings needles and pins, all kinds of part produced by using thin sheet.
Product | KINEMATIC VISCOSITY (40 °C, cSt) | FLASH POINT (°C) | COOLING RATE (°C/sn) |
---|---|---|---|
Quenchoil MRT Series | |||
QUENCHOIL MRT-78 | 75-85 | 232 | 85 ± 5 |
QUENCHOIL MRT-104 | 100-110 | 236 | 80 ± 5 |
QUENCHOIL MRT-156 | 150-160 | 248 | 75 ± 5 |
QUENCHOIL MRT-190 | 185-195 | 255 | 75 ± 5 |
QUENCHOIL MRT-320 | 310-330 | 260 | 70 ± 5 |
BELGIN is continuously improving the product performance with its industrial experts and R&D studies. All given figures on product properties are of a general nature only and may vary depending on process. For more info about our product portfolio and optimum solutions to your process, you may send email to این آدرس ایمیل توسط spambots حفاظت می شود. برای دیدن شما نیاز به جاوا اسکریپت دارید or contact with BELGİN Technical Business Development and Support department on 0090 262 751 0292.